Galletti S.p.A. is an enterprise founded in 1906 in Bologna.
It produces fan coils; Water chillers and heat pumps; Air-conditioning units and thermoventilation; Areotherms;
Air-conditioning split systems.

Galletti S.p.A. has a R&D laboratory where all the testing related to improving of the products are carried out. The structure of the laboratory covers 800 sq.m. and counts on 3 full time employees.

Galletti S.p.A. и un'impresa fondata nel 1906 in Provincia di Bologna.
Produce: Ventilconvettori, Refrigeratori d’acqua e pompe di calore, Unitа di condizionamento e termoventilazione, Aerotermi, Climatizzatori d’aria.

La Galletti S.p.A. и dotata di un laboratorio di Ricerca e Sviluppo, all’interno del quale vengono eseguite tutte le prove legate al miglioramento delle prestazioni, al controllo del mantenimento delle specifiche del prodotto finito ed al miglioramento dei singoli componenti dello stesso. I laboratori coprono un'area di 800 sq.m. e contano su 3 addetti.

The ASTECH project has set for objective to promote and disseminate Advanced Sustainable Energy Technologies for Cooling and Heating applications. The present publication provides this demonstration by describing exemplary realizations contributed by several project partners.
- Efficient solar building (Austria)
- 4 Solar assisted air-conditioning systems (Germany and France)
- Wood fuelled heating station (Bulgaria)
- 2 Ground source heat pump systems (Spain and Hungary)

The ASTECH project has set for objective to promote and disseminate Advanced Sustainable Energy Technologies for Cooling and Heating applications. The present publication provides this demonstration by describing exemplary realizations contributed by several project partners.
- Efficient solar building (Austria)
- 4 Solar assisted air-conditioning systems (Germany and France)
- Wood fuelled heating station (Bulgaria)
- 2 Ground source heat pump systems (Spain and Hungary)

Until now investigations of solar climatisation have mainly focussed on office buildings, regarding to the high sensible and especially latent climatisation load during summer time. Nevertheless the market for residential climatisation is also increasing, not only in the USA and southern countries, but also in the European countries, due to higher comfort demands. Thus this study concentrates on the potential of solar climatisation in Single-Family-Houses in different climates.

Until now investigations of solar climatisation have mainly focussed on office buildings, regarding to the high sensible and especially latent climatisation load during summer time. Nevertheless the market for residential climatisation is also increasing, not only in the USA and southern countries, but also in the European countries, due to higher comfort demands. Thus this study concentrates on the potential of solar climatisation in Single-Family-Houses in different climates.

Passive downdraught evaporative cooling (PDEC)involves spraying controlled volumes of microscopic water droplets into hot, dry ambient air, thereby causing it to cool and descend into a capture zone within a building. From here the cool air enters the adjacent occupied spaces through carefully sized and controlled openings. Close collaboration is needed between architects and engineers for PDEC to work well.

Passive downdraught evaporative cooling (PDEC)involves spraying controlled volumes of microscopic water droplets into hot, dry ambient air, thereby causing it to cool and descend into a capture zone within a building. From here the cool air enters the adjacent occupied spaces through carefully sized and controlled openings. Close collaboration is needed between architects and engineers for PDEC to work well.

PolySMART is a project partly funded by the European Union where 32 partners have decided to collaborate in order to develop a set of technical solutions for a new market segment for polygeneration, in particular the market for small tri -generation systems. Tri-generation denotes in the present case the combined production of power, heat and cooling in a single system (CHCP). The key components of a CHCP system are the co-generation unit, also called combined heat and power system (CHP), used to produce heat and electricity and the thermally driven chiller used to
convert the CHP heat into useful cooling.

PolySMART is a project partly funded by the European Union where 32 partners have decided to collaborate in order to develop a set of technical solutions for a new market segment for polygeneration, in particular the market for small tri -generation systems. Tri-generation denotes in the present case the combined production of power, heat and cooling in a single system (CHCP). The key components of a CHCP system are the co-generation unit, also called combined heat and power system (CHP), used to produce heat and electricity and the thermally driven chiller used to
convert the CHP heat into useful cooling.

The performance of building integrated polygeneration in terms of energy savings and environmental impact reduction are evaluated for small, well insulated office buildings by means of a simulation based case study.
The micro-polygeneration system assumed comprises a The micro-polygeneration system assumed comprises athermally driven cooling (TDC) unit and a back-up unit.

The performance of building integrated polygeneration in terms of energy savings and environmental impact reduction are evaluated for small, well insulated office buildings by means of a simulation based case study.
The micro-polygeneration system assumed comprises a The micro-polygeneration system assumed comprises athermally driven cooling (TDC) unit and a back-up unit.

This paper explains the operation of the geothermal system in closed circuit in CIM Azterlan, Durango (205 kW); goals to be achieved, drillings and pilot tests, characteristics of the facility and the first results.

La presentaciуn nos explica el funcionamiento del sistema geotйrmico en circuito cerrado de C.I.M. Azterlan, Durango (205 kW); los objetivos que se quieren alcanzar, los sondeos y pruebas piloto, caracterнsticas de la instalaciуn y los primeros resultados obtenidos.

The next paper highlights the different issues to take into account when working with energy wells for heat pumps; bedrocks, pipes, filling and pipe materials, collectors and so on.

The next paper highlights the different issues to take into account when working with energy wells for heat pumps; bedrocks, pipes, filling and pipe materials, collectors and so on.

The following presentation explains how concrete core tempering is done and also the different possibilities for concrete to be used in a geothermal installation. Some examples are also shown with economic and CO2 saving data.

The following presentation explains how concrete core tempering is done and also the different possibilities for concrete to be used in a geothermal installation. Some examples are also shown with economic and CO2 saving data.

The presentation shows both different geothermal installation configurations: shallow and ground source. In each case, heat pumps characteristics and methods are described. A reference to European heat pump market is done and also the place that these devices take in the EU RES-Directive.

The presentation shows both different geothermal installation configurations: shallow and ground source. In each case, heat pumps characteristics and methods are described. A reference to European heat pump market is done and also the place that these devices take in the EU RES-Directive.